255/25R24 in Inches

Understanding the dimensions of the 255/25R24 tire size in both metric and imperial units of measurement is an essential part of tire maintenance and replacement. Let us take a closer look at every important aspect of the 255/25R24 tire to understand what these numbers represent and how they may affect your vehicle's performance.

Buy 255/25R24 Tires

What is 255/25R24 in inches?

When we convert 255/25R24 to inches, it is equivalent to 29.1x10R24 tire size in the high flotation system. 255/25R24 tires have a diameter of 29.1" (738 mm), a tread width of 10" (255 mm), and can be mounted on a wheel with a diameter of 24" (610 mm). The sidewall of the tire is 2.5" (64 mm), and the tire's circumference is 91.4" (2317 mm). This means a 255/25R24 tire will make 693 revolutions per mile, or 432 revolutions per kilometer.

255/25R24 Section Width
10"
29.1"
255/25R24 Tire Side
Tire Circumference
91.4"
24"
2.5"
693 Revs/Mile
Metric Inches
Tire Diameter 738 mm 29.1"
Tread Width 255 mm 10"
Aspect Ratio 25%
Rim Diameter 610 mm 24"
Sidewall Height 64 mm 2.5"
Circumference 2317 mm 91.4"
Revolutions 432 per km 693 per mile

How to read 255/25R24 tire size?

Reading a tire size such as can be broken down into three main parts: tread width, aspect ratio and rim diameter.

255 is the width of the tire in millimeters from sidewall to sidewall when it's fully inflated and not under any load. In this example, the tire is 255 millimeters wide.

25 represents the height of the tire's cross-section as a percentage of its width. It means the height is 25% of the tire's width.

R denotes that tire has radial construction.

24 is the diameter of the wheel that the tire fits on, measured in inches. This tire would fit on a 24-inch wheel.

How to convert 255/25R24 to inches

The 255/25R24 conversion is very simple. There are 25.4 millimeters in an inch. All we have to do is divide tread width and sidewall height by 25.4 to convert to inches.

To convert the tire width to inches, you divide 255 mm by 25.4, yielding a tire width of approximately 10 inches. To find the sidewall height in inches, you calculate 25% of the tire width in millimeters (255 mm), convert this figure to inches as before, resulting in a sidewall height of about 2.5 inches. However, to understand the tire's overall diameter, you need to consider the height of two sidewalls and the diameter of the wheel it fits. Therefore, you multiply the sidewall height by 2 and add the wheel diameter (24 inches), giving you an overall tire diameter of approximately 29.1 inches.

So, when converted to inches, 255/25R24 tire is 10 inches wide, 29.1 inches tall, and fits 24-inch rims.

How wide is a 255/25R24 tire?

Tire width, also known as section width, is a measurement in millimeters that indicates the width of a tire from one sidewall to the other. It is the first number provided in a tire's size specifications. 255/25R24 tire has a width of 10 inches or 255 mm.

A greater tire width can increase the tire's contact patch with the road, potentially improving grip and handling. However, wider tires can also increase rolling resistance, which could negatively impact fuel efficiency.

Tire Width
Tread width: 10"

How tall is a 255/25R24 tire?

Tire height, also known as the tire's diameter or overall diameter, is the measurement from the ground to the top of the tire. It's essentially the distance from one side of the tire to the other, passing through the center, when it's correctly inflated and not under load. 255/25R24 tire has a diameter or height of 29.1 inches or 738 mm.

Tire Diameter
Tire height: 29.1"

255/25R24 Tire Sidewall Height

Tire sidewall height, also known as the tire's aspect ratio, is the measurement of the height of the tire's cross-section or the height of the tire from the rim to the tread. It is typically represented as a percentage of the tire's width. 255/25R24 tire has a sidewall height of 2.5 inches or 64 mm.

Sidewall height (also known as tire profile) can greatly affect a tire's driving characteristics. Lower profile tires (30 or 35 series) often provide better handling but can give a harsher ride, while higher profile tires (65 or 70 series) generally provide a smoother ride but with less precise handling.

Tire Sidewall Height
Sidewall height: 2.5"

What size rim fits a 255/25R24 tire?

The rim diameter refers to the diameter of the wheel on which a tire is mounted. It is the distance from one edge of the rim to the opposite edge, passing through the center of the wheel. 255/25R24 tire can be mounted on 24-inch wheels.

The rim diameter is crucial not only for fitting the tire properly but also plays a role in determining the overall performance of the vehicle, including its handling and ride quality.

Rim Diameter
Rim diameter: 24"

255/25R24 Tire Circumference

Tire circumference refers to the distance around the outer edge of a tire. It is the measurement of the entire circumference or perimeter of the tire when it is inflated and mounted on a wheel. 255/25R24 tire has a circumference of 91.4 inches or 2317 mm.

Tire Circumference
Tire circumference: 91.4"

How many revolutions does a 255/25R24 tire make?

Tire revolutions refer to the number of complete rotations a tire makes while the vehicle is in motion. It is a measure of the distance covered by the tire. 255/25R24 tire completes 693 revolutions per mile or 432 revolutions per kilometer.

Tire revolutions are often used in various calculations related to vehicle dynamics, such as determining the distance traveled, estimating fuel consumption, or calculating the speed of the vehicle based on the rotation of the tires. Tire revolutions can also be tracked or monitored by certain vehicle systems, such as the anti-lock braking system (ABS) or the vehicle's onboard computer, for various purposes.

Tire Revolutions
Tire revolutions: 693 per mile

More 24-inch Tire Conversions

All listed guides, data and/or calculations are for informational purposes only. TireConverter.com does not warrant or make any representations regarding the accuracy of or the results of the use of this information.