295/60R15 in Inches

Understanding the dimensions of the 295/60R15 tire size in both metric and imperial units of measurement is an essential part of tire maintenance and replacement. Let us take a closer look at every important aspect of the 295/60R15 tire to understand what these numbers represent and how they may affect your vehicle's performance.

Buy 295/60R15 Tires

What is 295/60R15 in inches?

When we convert 295/60R15 to inches, it is equivalent to 28.9x11.6R15 tire size in the high flotation system. 295/60R15 tires have a diameter of 28.9" (735 mm), a tread width of 11.6" (295 mm), and can be mounted on a wheel with a diameter of 15" (381 mm). The sidewall of the tire is 7" (177 mm), and the tire's circumference is 90.7" (2308 mm). This means a 295/60R15 tire will make 699 revolutions per mile, or 433 revolutions per kilometer.

295/60R15 Section Width
11.6"
28.9"
295/60R15 Tire Side
Tire Circumference
90.7"
15"
7"
699 Revs/Mile
Metric Inches
Tire Diameter 735 mm 28.9"
Tread Width 295 mm 11.6"
Aspect Ratio 60%
Rim Diameter 381 mm 15"
Sidewall Height 177 mm 7"
Circumference 2308 mm 90.7"
Revolutions 433 per km 699 per mile

How to read 295/60R15 tire size?

Reading a tire size such as can be broken down into three main parts: tread width, aspect ratio and rim diameter.

295 is the width of the tire in millimeters from sidewall to sidewall when it's fully inflated and not under any load. In this example, the tire is 295 millimeters wide.

60 represents the height of the tire's cross-section as a percentage of its width. It means the height is 60% of the tire's width.

R denotes that tire has radial construction.

15 is the diameter of the wheel that the tire fits on, measured in inches. This tire would fit on a 15-inch wheel.

How to convert 295/60R15 to inches

The 295/60R15 conversion is very simple. There are 25.4 millimeters in an inch. All we have to do is divide tread width and sidewall height by 25.4 to convert to inches.

To convert the tire width to inches, you divide 295 mm by 25.4, yielding a tire width of approximately 11.6 inches. To find the sidewall height in inches, you calculate 60% of the tire width in millimeters (295 mm), convert this figure to inches as before, resulting in a sidewall height of about 7 inches. However, to understand the tire's overall diameter, you need to consider the height of two sidewalls and the diameter of the wheel it fits. Therefore, you multiply the sidewall height by 2 and add the wheel diameter (15 inches), giving you an overall tire diameter of approximately 28.9 inches.

So, when converted to inches, 295/60R15 tire is 11.6 inches wide, 28.9 inches tall, and fits 15-inch rims.

How wide is a 295/60R15 tire?

Tire width, also known as section width, is a measurement in millimeters that indicates the width of a tire from one sidewall to the other. It is the first number provided in a tire's size specifications. 295/60R15 tire has a width of 11.6 inches or 295 mm.

A greater tire width can increase the tire's contact patch with the road, potentially improving grip and handling. However, wider tires can also increase rolling resistance, which could negatively impact fuel efficiency.

Tire Width
Tread width: 11.6"

How tall is a 295/60R15 tire?

Tire height, also known as the tire's diameter or overall diameter, is the measurement from the ground to the top of the tire. It's essentially the distance from one side of the tire to the other, passing through the center, when it's correctly inflated and not under load. 295/60R15 tire has a diameter or height of 28.9 inches or 735 mm.

Tire Diameter
Tire height: 28.9"

295/60R15 Tire Sidewall Height

Tire sidewall height, also known as the tire's aspect ratio, is the measurement of the height of the tire's cross-section or the height of the tire from the rim to the tread. It is typically represented as a percentage of the tire's width. 295/60R15 tire has a sidewall height of 7 inches or 177 mm.

Sidewall height (also known as tire profile) can greatly affect a tire's driving characteristics. Lower profile tires (30 or 35 series) often provide better handling but can give a harsher ride, while higher profile tires (65 or 70 series) generally provide a smoother ride but with less precise handling.

Tire Sidewall Height
Sidewall height: 7"

What size rim fits a 295/60R15 tire?

The rim diameter refers to the diameter of the wheel on which a tire is mounted. It is the distance from one edge of the rim to the opposite edge, passing through the center of the wheel. 295/60R15 tire can be mounted on 15-inch wheels.

The rim diameter is crucial not only for fitting the tire properly but also plays a role in determining the overall performance of the vehicle, including its handling and ride quality.

Rim Diameter
Rim diameter: 15"

295/60R15 Tire Circumference

Tire circumference refers to the distance around the outer edge of a tire. It is the measurement of the entire circumference or perimeter of the tire when it is inflated and mounted on a wheel. 295/60R15 tire has a circumference of 90.7 inches or 2308 mm.

Tire Circumference
Tire circumference: 90.7"

How many revolutions does a 295/60R15 tire make?

Tire revolutions refer to the number of complete rotations a tire makes while the vehicle is in motion. It is a measure of the distance covered by the tire. 295/60R15 tire completes 699 revolutions per mile or 433 revolutions per kilometer.

Tire revolutions are often used in various calculations related to vehicle dynamics, such as determining the distance traveled, estimating fuel consumption, or calculating the speed of the vehicle based on the rotation of the tires. Tire revolutions can also be tracked or monitored by certain vehicle systems, such as the anti-lock braking system (ABS) or the vehicle's onboard computer, for various purposes.

Tire Revolutions
Tire revolutions: 699 per mile

More 15-inch Tire Conversions

All listed guides, data and/or calculations are for informational purposes only. TireConverter.com does not warrant or make any representations regarding the accuracy of or the results of the use of this information.